Urania

Model 4000P Heat Sealer Specifications

SYSTEM REQUIREMENTS

Power Source                                      115 VAC/60 hz  15 AMPS

Air Supply                                            1.5 SCFM @ 80 PSI – ¼ NPT Female Inlet

General Maintenance                            Quarter annual

Preventative Maintenance                As per specified

Floor Space       30" long x 25" wide x 63" high                                    

                           67” long x 25” wide x 63” high  (with optional conveyor)

SYSTEM SPECIFICATIONS

All electrical components (AC) shall comply with UL61010A-1 (UL3101-1 first edition) or UL-sticker on the unit.

Power Cable Supplied                                  10 ft.

Controller                                            Programmable logic with lockout

Main Drive                                          AC Variable Speed

Speed Range                                        100 - 600 in./min. as shipped.

Weight                                                 Approximately 300 lbs.

Materials (except Commercial

Components)                                       304 stainless steel, anodized 6061 aluminum and Lexan

Mounting                                            Locking casters

Sealing Head Adjustability                Vertical and rotational

Sealing Belts                                        Teflonâ coated Fiberglass

Sealing Bars                                         Tri-axial self-adjusting

Sealing Bar Force                                    4 – 7 lbs.  (6lbs recommended)

Temperature of Operation                    100°C  -  300°C as shipped

Electrical Protection:  NEMA 1 with gasket on main cabinet.

Air regulator and filter with shut-off supplied – capacity equal to or greater than requirements.